Nylon PA6G
Key Features
- Low co efficient of friction
- Excellent sliding properties
- Chemical and thermal resistance
- Good UV resistance
- Can absorb up to 5.3% water
- Extruded Rod available up to 200mm
- Cast Rod available from 150mm and greater
Make Enquiry
Key Features
- Low co efficient of friction
- Excellent sliding properties
- Chemical and thermal resistance
- Good UV resistance
- Can absorb up to 5.3% water
- Extruded Rod available up to 200mm
- Cast Rod available from 150mm and greater
Overview:
Kormax Nylon G is a modified nylon that has the addition of oil to enhance its wear capabilities, pressure velocity ratio and reduce its friction. Kormax Nylon G has excellent impact strength, toughness wear resistance and can stand sustained contact with a wide variety of chemicals. Kormax Nylon G has good load bearing properties, low coefficient of friction and is self-lubricating. It is available in a wide range of sizes in rods, sheets and tubes and can easily be machined.
Material Profile
Metric
Imperial
| Profile | Size Range | Availability | |
| Rod | 11.8" see full size range | In Stock | |
| Sheet | 3.93" see full size range | In Stock | |
Physical Properties
| Material | Unit | Nylon |
| Tensile Strength at Break | N/mm2 | 50 |
| Yield Strength | N/mm2 | 70 |
| Elongation at Yield | % | 10% |
| Hardness | Mpa | M82 |
Physical Properties
| Size | Tolerances | |
| Rod | ||
| 50mm – 90mm | > 0.3mm – 3.2mm | |
| 100mm – 160mm | > 0.6mm – 4.2mm | |
| 170mm – 300mm | > 1.1mm – 12mm | |
| Sheet | ||
| 10mm – 25mm | > 0.2mm – 3mm | |
| 30mm – 50mm | > 0.5mm – 3mm | |
| 60mm – 100mm | > 0.5mm – 5mm |