Nylon PA6
Key Features
- High impact strength
- Wear resistant in abrasive conditions
- High tensile strength
- Can absorb up to 6% water
- Extruded Rod available up to 200mm
- Cast Rod available from 150mm and greater
Make Enquiry
Key Features
- High impact strength
- Wear resistant in abrasive conditions
- High tensile strength
- Can absorb up to 6% water
- Extruded Rod available up to 200mm
- Cast Rod available from 150mm and greater
Overview:
Kormax Nylon [technical name Polyamide] is one of the most widely used engineering plastic materials due to its excellent wear and bearing properties. Due to the way nylon shapes are manufactured, a vast array of shapes, sizes and grades are available. Kormax Nylons are frequently used to replace metals and other materials and can be a cost effective alternative. Kormax Nylons have extremely good wear resistance, high tensile strength, high impact resistance and good chemical resistance against many harsh chemicals. Compared to some metals, nylon can be up to 80% lighter.
Material Profile
Metric
Imperial
Profile | Size Range | Availability | |
Rod | 9.84" see full size range | In Stock | |
Sheet | 3.93" see full size range | In Stock |
Physical Properties
Metric
Imperial
Material | Unit | Nylon |
Tensile Strength at Break | psi | 7800 |
Yield Strength Min | psi | 12000 |
Elongation at Yield | % | 10% |
Hardness | MPA | M85 |
Machining Allowances:
Size | Tolerances | |
Rod | ||
5mm – 25mm | > 0.1mm – > 1mm | |
26mm – 56mm | > 0.2mm – 1.3mm | |
60mm – 100mm | > 0.3mm – > 2.5mm | |
110mm – 150mm | > 0.6mm – 4mm | |
160mm + | > 1.0mm – 5mm | |
Sheet | ||
1mm – 10mm | < 0.2mm – > 0.24mm | |
12mm – 25mm | > 0.2mm – 1.5mm | |
30mm – 50mm | > 0.5mm – 2.5mm | |
60mm-100mm | > 0.1mm – 3.5mm |