UHMWPE Rod & Sheet
Key Features
- Excellent wear resistance
- Good chemical resistance
- Excellent impact resistance at minus temperatures
- Available in Eco Friendly version made from organic raw materials
- Available with PTFE filler for extra low abrasion resistance
- Excellent value at a low cost
Make Enquiry
Key Features
- Excellent wear resistance
- Good chemical resistance
- Excellent impact resistance at minus temperatures
- Available in Eco Friendly version made from organic raw materials
- Available with PTFE filler for extra low abrasion resistance
- Excellent value at a low cost
Overview:
Kormax UHMWPE [short for Ultra-high Molecular Weight Polyethylene] has excellent chemical resistance, good fatigue and wear resistance. The specific gravity of polyethylene is less than 1, hence it floats in water and is easy to identify. Kormax UHMWPE has excellent impact resistance and can be used in low temperatures down to -80ºC. Most grades are non-toxic and can be used in applications in direct contact with food and can be easily machined.
Material Profile
Metric
Imperial
Profile | Size Range | Availability | |
Rod | 9.84" see full size range | In Stock | |
Sheet | 4.9" see full size range | In Stock | |
Max Sheet | 3.9" see full size range | In Stock | |
Eco Sheet | 4.9" see full size range | In Stock |
Physical Properties
Metric
Imperial
Material | Unit | PETP Max |
Tensile Strength at Break | psi | 6000 |
Yield Strength | psi | 3000 |
Elongation at Yield | % | 20% |
Hardness | MPA | 38 |
Machining Allowances:
Size | Tolerances | |
Rod | ||
5mm – 25mm | > 0.1mm – > 1.1mm | |
26mm – 56mm | > 0.2mm – 1.3mm | |
60mm – 100mm | > 0.4mm – 2.2mm | |
110mm – 150mm | > 0.6mm – 4mm | |
160mm + | > 1.0mm – 6mm | |
Sheet | ||
1mm – 10mm | < 0.2mm – > 1.0mm | |
12mm – 25mm | > 0.3mm – 1.1mm | |
30mm – 50mm | > 0.5mm – 1.2mm | |
60mm-100mm | > 0.1mm – 1.6mm |